VoltCraft Pro™ — Strip, Cut, Crimp & Test Any Wire With One 7-in-1 Tool
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Strip, Cut, Crimp & Split Every Wire — Without Switching Tools
When you’re up a ladder or buried in a panel, the last thing you want is to climb back down for a different tool. The VoltCraft Pro™ packs seven jobs — clamping, stripping, cutting, winding, splitting lines, crimping, and a built-in voltage check — into one 220mm plier. Grab it once, finish the run, move on.
Stop Hauling a Pouch That Weighs More Than the Job
Digging through a bag for the right tool mid-task is dead time — and every swap is a chance to drop something off a ladder. Bulky kits and single-job tools slow you down and wear out your hand. The VoltCraft Pro™ keeps strip, cut, crimp, split, and test in one grip, so you stop carrying three tools to finish one connection.
➤ Seven Jobs, One Grip: Clamping, stripping, cutting, winding, splitting lines, crimping, and a voltage check all live in a single 220mm tool — a full wiring run never means reaching for something else.
➤ Strips Clean Without Nicking the Copper: Gauge-matched stripping holes pull insulation off in one pass and leave the conductor whole — fewer reworks, tighter joints.
➤ Built From 3CR13 Steel for the Brutal Days: Hardened stainless jaws and a non-slip green grip hold their edge through panel after panel — not just the first week.
Feel Every Wire Job Click Into Place — Like You’ve Done It a Thousand Times
Match your gauge to the marked hole, squeeze once, and the insulation slides off clean — no nicked strands, no second pass. Drop a multi-core cable into the four-hole winding and split guides and the conductors separate and twist out for your terminals in a single motion.
That’s the gap between a real electrician’s plier and a flimsy strip-only tool that chews the copper and forces a redo. The crimp barrel locks connectors down tight, and the voltage check in the handle gives you a fast confirm-it’s-dead read before you reach in.
Why Working Electricians Keep One in the Pouch and One in the Van
Plenty of guys grabbed this expecting another cheap import and ended up reaching for it before their name-brand strippers. “Honestly skeptical when it showed up — but it strips cleaner than my old set and I quit carrying three separate tools,” says Marcus R. Once seven jobs live in one hand, the heavy pouch starts to feel pointless.
Walk Onto Every Job Knowing One Tool Has It Covered
✓ Finish Runs Without the Tool Shuffle: Strip, cut, crimp, split, and test in one grip — fewer trips back to the bag, more connections done.
✓ Lighten the Pouch: One 0.35kg plier replaces a fistful of single-job tools — easier to carry up a ladder, easier to find.
✓ Steady Control That Saves Your Hand: The contoured non-slip grip stays planted through long days, so your hand isn’t aching by the last circuit.
Simple 3 Steps to a Clean, Trusted Connection Every Time
Step 1: Match the wire to the marked stripping hole, then cut to length with the hardened jaws — one clean pass, no frayed ends.
Step 2: Strip the insulation without nicking the copper, then drop multi-core cable into the winding and split holes to separate and twist the conductors.
Step 3: Seat your connector in the crimp barrel and lock it tight — then run the handle’s voltage check to confirm the line before you close up.
| VoltCraft Pro™ | Traditional Multi-Tool Kits | Single Function Tools |
|---|---|---|
| Seven jobs in one 220mm plier: clamp, strip, cut, wind, split, crimp & test | ❌ | ❌ |
| Strips clean without nicking the copper — fewer reworks | ❌ | ❌ |
| 3CR13 stainless build that holds its edge job after job | ❌ | ❌ |
Technical Specifications
- Material: 3CR13 hardened stainless steel with a non-slip green/black rubber grip
- Size: 220mm full length (100mm head, 120mm handle) — fits a standard tool pouch
- Weight: 0.35kg (350g) — one tool instead of a handful
- Functions: 7-in-1 — clamping, wire stripping, cutting, four-hole winding, splitting lines, crimping, and voltage testing
Questions That Nail Your Doubts Before You Buy
How many wire sizes can it strip?
The marked stripping holes cover the common gauges you hit on residential and light-commercial runs. Match the wire to the hole, squeeze once, and the insulation comes off without chewing the copper.
Is the voltage tester reliable enough to trust?
Use the handle’s voltage check as a fast on-the-spot confirm-it’s-dead read, paired with your normal lockout habits. It’s a quick indicator for everyday work — not a replacement for a calibrated meter on critical jobs.
Will it actually hold up on daily commercial work?
The jaws are 3CR13 hardened stainless and the joint is built for repeated squeezing. It’s made to be the tool you grab every day — not the one that loosens up after a month.
What if it’s not right for how I work?
Try it on a real job. If the VoltCraft Pro™ doesn’t earn its spot in your pouch, send it back within the guarantee period — no hassle, no runaround.
How do I keep it working like new?
Wipe the jaws dry after wet or dusty work and add a drop of oil at the joint now and then. That keeps the strip holes clean and the action smooth.
One Tool That Earns Its Spot in Your Pouch Every Single Day
The VoltCraft Pro™ isn’t another gimmick plier — it’s the seven-jobs-in-one tool that strips clean, crimps tight, splits multi-core cable, and tells you the line’s dead before you reach in. Grab it once, and you’ll stop carrying the rest.
What our customers have to say:
Luvilea Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.