TrueEdge™ — Level Drywall Edges That Tape Flat with One Smooth Stroke
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Cut Crisp 45° Drywall Edges That Tape Smooth — No Rasping, No Fuzz
You sliced your sheets with a utility knife and ended up with rough edges. The TrueEdge™ Chamfer Plane trims a flawless 45° bevel on every cut edge in a single stroke — so your tape lays flat, your mud spreads thin, and you’re not fixing cracks six months down the road.
Say Goodbye to Jagged Drywall Edges That Refuse to Lay Flat
Edges cut with a knife come out rough, fuzzy, and uneven. Tape over that and your seam will show through the finish — or worse, crack when the wall settles. A surform rasp helps, but it’ll zap an hour per room and leave your wrist aching. There’s a smarter, quicker way.
➤ Set It Once, Sharpen Every Edge the Same: Adjustable chamfer depth from 2–9mm (~0.08–0.35") and a 0–12mm flat plane mode for smoothing high spots. Lock the knob and every pass cuts identical — no angle babysitting required.
➤ Grips the Board, Not Your Grip: Aluminum body with a non-slip thumb pad rides snug against the edge so the blade won’t skip, dive, or bind. You can plane a full sheet without your wrist giving out.
➤ Change Blades in Less Than 30 Seconds: Loosen the knob, lift the clamp, swap blades, and tighten back up. Comes with 10 spares — plenty to outlast basement finishes, garage conversions, and extra bedrooms.
Two Blades, One Aluminum Frame, Zero Tear-Out
Inside the tool, two blade slots offer a 45° angled cutter for chamfering edges and a flat blade for shaving down high spots or planing flush. Just loosen the thumb knob, flip which blade is out, and tighten — no tools needed, under a minute.
The non-slip thumb pad is where most cheap planes fail and this one excels. It keeps the body flat against the sheet edge so the blade never plunges into gypsum or tears the paper. You’ll notice the difference the moment you tape over your work.
Why DIYers Ditched the Drywall Rasp for Good
The buzz on basement finishing forums is clear. “Finished three rooms last weekend — the edges came out cleaner than even factory tapers. Wish I’d had this on my last project — would have saved tons of rasping time.” — Mike R., Ohio. It’s the same line everywhere: ragged seams turn into neat chamfers, tape lays tight on the first go, mud spreads thin.
Cleaner Chamfers, Faster Installations, Less Sanding
✓ Tape Lies Flat Straight Away: A precise 45° chamfer offers joint compound a solid surface — no bumps under tape, no fine cracks returning next year.
✓ Works Beyond Drywall: Gypsum board, MDF, cork sheets, acoustic panels — same plane, same blade, same crisp edge. This one tool handles most garage-stacked materials.
✓ Quieter Than Power Tools, Faster Than Rasps: Manual control means no dust storm, no cords, no shredded paper edges. Just a clean curling strip of gypsum shaving off the blade.
Just Three Steps from Unboxing to First Cut
Step 1: Loosen the thumb knob and lift the blade clamp — the included tools make it quick.
Step 2: Insert a new blade (or flip the current one), adjust your chamfer depth, then tighten the knob again.
Step 3: Hook the body over your cut edge, slide the plane along the sheet, and reveal a clean 45° bevel in one smooth pass.
| TrueEdge™ Chamfer Plane | Drywall Rasp | Utility Knife Alone |
|---|---|---|
| Adjustable 45° chamfer + flat plane in one body | ❌ | ❌ |
| Non-slip thumb pad keeps the edge flush — no skipping, no tear-out | ❌ | ❌ |
| 10 spare blades + tool-free swap in under 30 seconds | ❌ | ❌ |
What’s Inside the Box
- Body: Aluminum alloy with non-slip thumb pad and steel hardware
- Dimensions: 17cm × 6cm × 4.2cm (6.7" × 2.4" × 1.65") — palm-sized, fits perfectly in a tool belt
- Chamfer Depth: Adjustable from 2–9mm at 45° (0.08–0.35")
- Flat Plane Depth: Adjustable between 0–12mm (0–0.47")
- Included: 1 plane body + 10 replacement blades + adjustment knob/wrench
Have Questions? Real Answers Right Here.
Will it work on standard ½" and ⅝" drywall?
Absolutely. The 0–12mm flat range and 2–9mm chamfer comfortably cover both ½" (12.7mm) and ⅝" (15.9mm) gypsum boards. Just set the depth once and go.
Does it really clean up fuzzy knife-cut edges or just nick them?
It precisely carves a fresh 45° angle on the cut, including paper. The tear-out from your utility knife is shaved off in that same pass — no rasp needed after.
How long do the blades last?
One blade usually lasts through 15–25 drywall sheets before dulling — with 10 spares included, you’re covered for most projects.
Can a beginner get a clean cut right away?
Definitely. Set the depth, hook it on the edge, pull. The thumb pad keeps the body flat — no special skill or angle babysitting needed.
Any safety tips I should follow?
Wear safety glasses (gypsum dust will fly), keep the tool away from children, and store it dry. The blades are sharp — handle with the same care as utility blades.
Give It a Go on Your Next Wall — 30-Day Flat-Tape Guarantee
If TrueEdge™ doesn’t carve a chamfer sharp and flat enough to tape smoothly, return it within 30 days for a full refund. No restocking fees, no requests for videos first. Worst case, you lose a few minutes trying it. Best case, you ditch the rasp forever.
What our customers have to say:
Luvilea Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.