ContourMaster™ — Lock Any Curve and Cut It Perfect the First Time |
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Stop Re-Cutting Boards That Don't Fit
You measured twice, cut once — and the plank still won't sit flush against the pipe. ContourMaster™ presses against any curve, corner, or molding and locks the exact shape in place, so you trace it straight onto your material and cut it right the first time. Beginner or pro, no more guessing on the tricky edges.
Cardboard Templates and Eyeballing It End Here
Tracing onto scrap cardboard slips. Eyeballing a curve around a toilet flange or door casing wastes a whole plank when it comes back wrong. The frustration stops here: ContourMaster™ copies the shape down to the millimeter and holds it, so the only thing left to do is cut.
➤ Copy Any Shape in Seconds: Press the pins against pipes, tile edges, or skirting and the profile transfers instantly — no measuring, no math, just an exact outline ready to trace.
➤ Lock It So It Won't Shift: The sliding lock bar clamps the pins tight the moment you've got the shape. Carry it to the saw, trace, and cut — the outline stays put the whole way.
➤ Stop Wasting Planks and Tile: Get the fit right on the first cut instead of the third. One clean transfer saves the material — and the hour — you'd burn redoing it.
The Sliding Lock That Holds Your Shape Dead Still
Push ContourMaster™ against an edge and each thin pin slides back on its own to copy the contour exactly. Slide the lock bar across and the whole row freezes — pick it up, flip it over, trace it, and the shape hasn't moved a hair.
Cardboard patterns bend. Cheap gauges let the pins drift the second you lift them off the surface. The locking bar on this one is the difference between a profile you can trust at the saw and one that's already wrong by the time you trace it.
Why DIYers and Flooring Pros Keep One in the Bag
Plenty of people grabbed it skeptical — figured it was another flimsy gadget — then locked one shape around a complicated curve and watched it transfer perfectly with no adjustments. "Much better than cardboard patterns," is how one buyer put it after fitting an irregular edge. It's the tool people wish they'd had before they started the job.
Fits Like You Cut It By Hand — Without the Hour
✓ Nails the Tricky Edges: Pipes, door casings, uneven tile, baseboard corners — the spots that freeze other tools up are exactly where this one earns its keep.
✓ Built to Take a Beating: Solid ABS plastic body that lives in the toolbox job after job without warping or cracking.
✓ Right the First Time: Trace the locked profile, cut once, and watch it drop into place — no shaving, no re-cutting, no second trip to the saw.
Three Steps From Edge to Perfect Cut
Step 1: Press the pins of ContourMaster™ firmly against the edge you're copying — the shape transfers the instant you push.
Step 2: Slide the lock bar across to clamp the pins so the profile can't shift on the way to your material.
Step 3: Trace the locked shape onto your board or tile and cut — it'll sit flush like it was made for the spot.
| ContourMaster™ | Cheap Gauges | Cardboard Templates |
|---|---|---|
| Locking bar holds the shape after you lift it off | ❌ | ❌ |
| Copies curves down to the millimeter, no measuring | ❌ | ❌ |
| ABS body that lasts job after job | ❌ | ❌ |
The Specs That Decide If It Fits Your Job
- Material: Solid ABS plastic body with a printed ruler scale along the edge
- Width Range: Copies shapes up to 9.8 inches (25 cm) wide
- Lock Mechanism: Sliding lock bar that clamps the pins so the profile won't drift
- Best For: Flooring, tile, laminate, skirting, pipe cutouts, custom carpentry, and any curved edge
Questions That Help You Decide
How does it copy the shape so accurately?
Press it against an edge and dozens of thin pins slide back individually to match the contour. The sliding lock bar then clamps them in place so the shape transfers exactly when you trace it.
Is it beginner-friendly or just for pros?
Both. There's nothing to set up — press, lock, trace, cut. First-timers get a clean fit on day one, and pros keep one in the bag for the awkward edges.
What surfaces and materials does it work on?
Any firm edge — wood, tile, laminate, pipes, baseboards, and irregular curves. You're copying the shape, then cutting your own material to match, so it works across flooring, carpentry, and tiling jobs.
How wide a shape can it capture?
Up to 9.8 inches (25 cm) across in a single press — enough for most pipe cutouts, door casings, and floor-plank edges. For wider runs, copy it in overlapping sections.
Will it hold up in a toolbox?
Yes. The body is solid ABS plastic built to ride in the bag and get used job after job without the pins loosening or the frame warping.
Get the Fit Right the First Time
Quit burning planks and patience on edges that won't sit flush. ContourMaster™ copies the curve, locks it solid, and hands you an exact outline to cut to — so the piece drops into place like you spent an hour shaping it by hand. Grab yours and make the next tricky cut the easy one.
What our customers have to say:
Luvilea Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.