ProGrip™ — Solo Lift Heavy Tile, Glass, and Mirrors Without Any Slip
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Lift Heavy Tile, Glass, and Mirrors Solo — No Slips, No Scratches, No Help Needed
Forget struggling with bare-hand lifts. The ProGrip™ Suction Lifter secures itself to polished tile, tempered glass, mirrors, sealed stone, and sheet metal via a 118mm vacuum pad and an 8mm rubber gasket — powerful enough to support a heavy porcelain slab single-handedly, gentle enough to prevent any marks on a mirror-like surface.
Tired of Bare-Hand Lifts, Flimsy Cups That Fail, and the Risk of Dropping $80 Tiles?
Hands slip on smooth surfaces. Cheap suction cups from hardware stores lose grip unexpectedly. The two-person-and-hope method falls apart when your helper cancels. You need a single airtight hold that stays locked from press to release — each and every time.
➤ 118mm Vacuum Pad That Grips and Holds: Press the pad flat, toggle the cam lever, and the rubber gasket creates a vacuum strong enough to securely hold heavy porcelain slabs, tempered glass sheets, and full-size mirrors one-handed.
➤ 8mm Rubber Gasket — Thick to Grab, Soft to Protect: Cushions polished surfaces so no scuffs, suction rings, or residue remain when released.
➤ All-Metal Frame + ABS Cam Lever: 170mm yellow alloy chassis resists flexing under load. The 80mm cam lock engages in under a second — no thumb fatigue, no half-engaged lever slipping mid-lift.
How a Single Cam Lever Turns a Rubber Pad Into a Glass-Gripping Vise
Press the 118mm pad firmly against any smooth, non-porous surface — polished porcelain, tempered glass, sealed marble, sheet metal, or finished plywood. Flip the 80mm cam lever and the rubber gasket flexes into a sealed pocket, pulling a partial vacuum that stays locked until you release it.
The yellow alloy frame maintains rigidity under pressure instead of bending and breaking the seal. The 24mm knurled steel knob lets you fine-tune pressure. The textured ABS lever holds grip even with dusty or tile-adhesive coated hands — exactly when you need control most.
Why DIY Renovators and Weekend Tile Installers Choose This Over a Helping Hand
Whether remodeling a bathroom, installing a backsplash, or swapping out shower glass — those who once needed an extra pair of hands now place large slabs solo with this tool in their kit.
"I was about to text my brother-in-law to come help set a 30x60 porcelain plank. Instead, I brought this out and set the slab solo in ten minutes. Saved my back and the tile." — Mike R., Phoenix AZ
What Changes The Moment You Try It
✓ Solo Lifting Becomes A Breeze: No more hunting down a buddy on Saturday. Press the pad, flip the lever, lift — done.
✓ Polished Surfaces Stay Flawless: The 8mm rubber gasket grips without scratching, scuffing, or leaving suction rings on glass, mirrors, or glossy tile.
✓ The Scariest Part Gets Easy: Trusting that the seal won’t fail mid-lift turns the toughest part of installation into the simplest.
How to Create a Vise-Grip Seal in 3 Simple Steps
Step 1: Clean and dry the surface — dust kills suction faster than cracks in the gasket.
Step 2: Press the rubber pad flat against the surface, then fully flip down the cam lever to pull the vacuum seal tight.
Step 3: Lift, transport, or hold as long as needed. Flip the lever back to release with a soft pop — no marks left behind.
| ProGrip™ Suction Lifter | Bare Hands + Gloves | Cheap Plastic Suction Cups |
|---|---|---|
| 118mm vacuum pad + all-metal body supports heavy slabs single-handedly | ❌ Hands slide on polished surfaces, chip edges | ❌ Sudden vacuum loss mid-lift without warning |
| 8mm rubber gasket grips without marring glass or mirrors | ❌ Fingerprints smudge the finish | ❌ Hard plastic edges leave suction marks |
| Metal frame + ABS cam lever locks in under one second | ❌ Requires two people — and your helper might not show | ❌ Breaks after a few uses |
Specs for the Detail-Oriented
- Color: Yellow powder-coated metal frame
- Dimensions: 6.7 in long × 4.3 in tall (170mm × 110mm)
- Suction Pad: 4.6 in diameter (118mm) with 0.31 in (8mm) rubber gasket
- Cam Lever: 3.1 in (80mm) throw, textured ABS grip
- Materials: Metal alloy frame, ABS lever, rubber gasket
- Includes: 1 ProGrip™ Suction Lifter
Questions? Here’s What You Really Want to Know
Will it hold a heavy porcelain plank without the vacuum failing mid-lift?
Yes — on clean, smooth, non-porous surfaces, the 118mm pad creates a strong vacuum that supports heavy tile, glass, sealed stone, and sheet metal. Clean dust off surfaces before sealing for optimal hold.
Will the rubber leave marks on polished glass or mirrors?
No. The 8mm rubber gasket is soft enough to seal cleanly — releasing without suction rings or residue, even on glossy tile and polished glass.
Does it work on textured tile, raw stone, or porous surfaces?
It requires a smooth, non-porous surface for a tight vacuum — polished porcelain, sealed marble, glass, metal, and finished plywood are compatible. Rough stone, raw concrete, or unsealed porous tiles won’t maintain the seal.
Is the body genuinely metal, or metal-colored plastic?
It’s a true metal alloy — the yellow frame seen here. The cam lever is reinforced ABS plastic for durability and grip, and the gasket is genuine rubber. No plastic painted to look like metal.
How can I release the seal without dropping the panel?
Support the panel with your free hand or rest it against a solid edge, then flip the cam lever up. The vacuum releases with a gentle pop and the pad lifts off cleanly.
Quit Sweating the Lift. Start Setting Tile Like a Pro Veteran.
Reach for the ProGrip™ Suction Lifter and turn the toughest part of your install into the easiest. No partner required. No marks on your $80 tile. Just a smooth, controlled lift — every time you engage the lever.
What our customers have to say:
Luvilea Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.