SteelBond Pro™ — Repair Cracked Metal in 60 Minutes Without Welding Tools
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Seal Cracks, Holes & Stripped Threads — No Welder, No Torch, No Do-Overs
You gave JB Weld a shot last winter. It failed before the season ended. SteelBond Pro™ is the 1:1 AB epoxy that penetrates metal pores deeply, sets hard as rock within 60 minutes, and cures into a steel-strength bond you can drill, sand, and paint just like the original metal.
Quit Re-Patching the Same Crack Twice
Typical hardware store epoxies promise big but fall apart within months. Single-tube adhesives peel off cast iron surfaces. Welding repairs can cost $150+ before parts — and that’s just a quote. SteelBond Pro™ cuts out all that hassle: a dual-chamber AB tube that auto-balances every squeeze — no mixing blobs on cardboard.
➤ Bonds Cast Iron, Steel, Aluminum & Alloys: Our steel-reinforced two-part formula seeps into metal pores locking at the molecular scale, sticking where superglue and single-tube patches just flake off.
➤ Endures From -40°F to 392°F: Perfect for engine compartments, exhaust systems, radiators, outdoor piping, and frozen joints — it won’t soften in summer heat or shatter in the cold.
➤ Drill, Sand & Paint Like New: Once set, the repaired area acts like the surrounding metal. Cut fresh threads, refinish smooth, and blend repairs for a flawless finish.
Introducing SteelBond Pro™ — The 1:1 AB Blend That Bonds Like Welded Steel
Pull the trigger and the dual-chamber applicator delivers a precise 1:1 mix of resin and hardener every time. Spread it over the damage with the included spatula. Step away for an hour as the chemical bond pulls your metal together — no torch, no sparks, no 220-volt plug required.
By full cure at 24 hours, the patched area is often tougher than the original metal — strong enough to drill a bolt hole, file smooth, and prime for painting.
Why Mechanics & DIYers Are Ditching JB Weld
Plumbers, mechanics, and weekend warriors keep choosing SteelBond Pro™ because it holds on the first try. "My F-150 radiator housing had a hairline crack I'd JB Welded twice already. Used SteelBond Saturday. By Tuesday morning, I drilled a new clip mount right through the patch—still completely dry." — Mark D.
Walk Away Confident Your Repair Will Last
✓ Repairs Stick the First Time: Over 4,000 PSI tensile strength at full cure in 24 hours — drill it, tap it, sand it without peeling or cracking.
✓ Resists Water, Oil, Salt & Chemicals: From submerged joints to greasy engine blocks — the finished bond withstands corrosion, mildew, and harsh solvents.
✓ One 50ml Tube Covers Many Fixes: Dual-chamber auto-matching means zero waste — use just what you need, cap it, and save the rest for next time.
Fix Any Damage in 3 Simple Steps
Step 1: Roughen the metal with sandpaper and wipe down with acetone — clean surface, strongest bond.
Step 2: Squeeze the epoxy onto the included spatula and press it firmly into the crack, hole, or gap.
Step 3: Leave it for 60 minutes. Return to a rock-solid repair. Full strength sets at 24 hours — then drill, sand, or paint as needed.
| SteelBond Pro™ | Welding | Single-Tube Epoxies |
|---|---|---|
| Secures on first try — no welder, torch, sparks, or 220-volt outlet needed | ❌ | ❌ |
| Auto-balanced 1:1 AB blend — no eyeballing mess on cardboard | ❌ | ❌ |
| Withstands -40°F to 392°F, plus water, oil, salt & chemical resistance | ❌ | ❌ |
Specifications That Enable Pro-Level Repairs
- Capacity: 50ml dual-chamber tube (3.5 oz total) — enough for multiple repairs per tube
- Dimensions: 4.8 x 1.8 inches — fits in a tool drawer or glove compartment
- Mix Ratio: Auto-balanced 1:1 A and B — squeeze to dispense, no measuring needed
- Cure Time: 60-minute initial set, full cure in 24 hours for drilling, sanding, and painting
Still Unsure if It’s the Right Choice for You?
I’ve been burned by JB Weld before — what sets this apart?
Two key points: the auto-balanced 1:1 applicator guarantees perfect mixes every time, and the steel-reinforced formula cures harder than most single-tube epoxies. Surface prep is still crucial — sand and clean with acetone before applying.
Will it bond cast iron, aluminum, and stainless steel?
Absolutely — steel, cast iron, aluminum, brass, copper, and most alloys. Also sticks metal-to-ceramic, metal-to-plastic, and metal-to-stone for repairs across materials.
Can I drill, tap, and paint over the cured patch?
Yes. After the 24-hour full cure, the repair handles drilling, tapping, sanding, and painting just like the surrounding metal.
Will it withstand heat on engines or exhaust parts?
The bond holds firm from -40°F up to 392°F. That covers radiator housings, engine cases, water pumps, and most exhaust parts except the manifold itself.
Is the patch truly waterproof and oil-resistant?
Yes — fully submerged pipe joints, greasy engine blocks, salt spray, and damp basements all hold tight. The cured bond is non-porous and chemically inert.
Fix It Once, Fix It Right — With Our 60-Day Bond Warranty
If SteelBond Pro™ fails to hold your repair during normal use, return it within 60 days for a full refund — no welder, no extra tube, no pricey $200 shop charge. Order yours below and wrap up your repair today.
What our customers have to say:
Luvilea Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.