PrecisionPro™ — Carve Factory-Crisp 45° Tile Miters Minus a Wet Saw
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Slice Factory-Sharp 45° Tile Miters Without Renting A Wet Saw
Put an end to chipping $14 porcelain tiles every time your blade snags. The PrecisionPro™ Tile Chamfer Stand secures your Type 100 angle grinder onto a fixed 45° guide so the diamond blade does the cutting — not your wrist. Features built-in water cooling, four-knob bed adjustment, and a stainless steel cradle that delivers consistent cuts every time.
Quit Ruining Tiles With Wobbly, Chipped Freehand Miters
You know the drill. The grinder wobbles, the blade jams mid-cut, and the porcelain face cracks right where it's most noticeable. Renting a wet saw costs $80–$120 daily. A cheap manual tile cutter only manages 90° cuts—not 45° miters. So you resort to freehand cutting — and tiles keep going to waste.
➤ Fixed 45° guide stops the wobble: The cradle locks your grinder at a precise 45°, while the steel bed holds the tile flat underneath — no drift, no chatter, no uneven edges.
➤ Push-fit water cooling prevents chipping: Integrated water-line connector delivers a steady drip onto the blade as it cuts — suppresses dust, cools the diamond, and keeps the porcelain face intact.
➤ Four-knob bed fits all tile thicknesses: Adjust the locking knobs to slide the bed beneath your blade for tiles up to 15mm thick — wall tile, floor tile, stone slab, all without switching jigs.
How The PrecisionLock™ Cradle Creates Factory-Perfect Miters
Most chipping occurs as the blade exits the cut. When the blade leaves the tile freehand, the porcelain face cracks because the disc tilts just a fraction at the worst moment. The PrecisionLock™ cradle stops that tilt — your grinder fits snugly in a steel collar that stays steady while the tile glides flat on the bed below.
Add the push-fit water line and the diamond stays cool on every pass, so the blade won’t glaze and the cut edge stays sharp. That’s what separates “looks DIY” from “looks like the pros did it.”
Why DIYers Are Ditching The Wet-Saw Rental
After cutting crisp 45° miters on real porcelain with this stand, freehand feels like punishment. Renovators, weekend tilers, and small contractors all say the same — faster setup than hauling a wet saw home, less cleanup, and miters that fit factory-tight once grouted.
"I chipped two porcelain tiles freehand before this arrived. Once I locked it in, I cut sixteen miters in a row — every one tight enough to grout a 1mm line. Wish I’d got it before starting the bathroom." — Marcus T.
Cut Like A Tile Shop, Not Like A Rookie
✓ Perfectly tight miters every time: Lock the bed, slide the tile, get chip-free 45° edges that grout up to a crisp 1–2mm line on outside corners.
✓ Suitable for porcelain, ceramic, and stone: One setup handles wall tile, floor tile, and stone slabs up to 15mm — no need to swap jigs.
✓ Built tough to outlast a full bathroom: Heavy-duty stainless platform and reinforced cradle keep every cut square — won’t flex mid-job.
Set Up In Under 90 Seconds, Then Just Cut
Step 1: Place your Type 100 angle grinder into the steel cradle — fits gearboxes up to 4.5cm (1.77") wide — and tighten the PrecisionLock™ collar.
Step 2: Turn the four bed knobs to fit your tile thickness, then connect a standard water line to the push-fit connector for cooling and dust control.
Step 3: Power up, feed the tile flat along the bed, and let the locked 45° track do its thing — every miter comes out identical.
| What You Need | PrecisionPro™ Stand | Handheld Cutting |
|---|---|---|
| Chip-free 45° miters | ✅ Locked bed, every cut | ❌ Wavy, chipped edges |
| Water cooling for porcelain | ✅ Push-fit hose connector | ❌ Dry-cut dust and glazing |
| Holds true cut after cut | ✅ Stainless cradle, won't flex | ❌ Wrist fatigue, drift |
Technical Specs Made Simple
- Fits Your Grinder: Type 100 angle grinders with gearbox/neck diameter up to 4.5cm (1.77")
- Material: Heavy-gauge stainless steel platform with reinforced metal cradle
- Cut Angle: Locked 45° for chip-free chamfer miters
- Tile Thickness: Adjustable bed handles tiles up to 15mm
- Base Dimensions: 13.5cm (W) × 30cm (L)
- Water Cooling: Push-fit connector for standard water-line tubing
- Includes: 1× PrecisionPro™ Tile Chamfer Stand
Got Questions? We've Got You Covered
Will this fit my angle grinder?
If your grinder is a Type 100 (4" / 100mm) with a gearbox neck up to 4.5cm (1.77") wide, it fits right in. Most popular brands — DeWalt, Makita, Bosch, Milwaukee — are compatible. Check the round housing behind the disc guard if uncertain.
Does the water cooling actually work?
Yes — especially for dense porcelain. A wet blade runs cooler, avoids glazing, and exits without cracking the tile surface. Plus, it cuts down over 80% of the dust cloud from dry cutting.
How thick of tile can it handle?
The bed adjusts for tiles up to 15mm thick — from standard 8mm wall tile to 12mm floor porcelain and thicker stone. Twist the four locking knobs to slide the bed beneath your blade.
Is the metal solid or thin stamped junk?
Genuine stainless steel platform, reinforced cradle, and steel hardware. Built to handle a full bathroom or kitchen job without bending out of square — not just a one-off tool.
Is the angle grinder included?
No — this package includes only the PrecisionPro™ Tile Chamfer Stand. You’ll need your own Type 100 angle grinder plus a diamond blade rated for tile cutting/grinding.
Made For Tilers Wanting Tile-Shop Edges Without The Tile-Shop Price
If your PrecisionPro™ stand doesn’t produce chip-free 45° miters straight away, return it for a full refund — no restocking fees, no hassle. Get the cleanest miters of your remodel, or you don’t pay for the tool.
What our customers have to say:
Luvilea Guarantees
Rated 4.6 / 5 based on 1289 reviews. Showing our 4 and 5-star reviews.